When you turn on your Netgear router, the power light on it will blink for some time and then become stable. But what happens if the power LED on your Netgear router remains orange for longer than expected? Worry not! This particular troubleshooting guide will help you fix the orange LED issue with your Netgear router in minutes! Keep reading!
Resolved: Netgear Router Orange Light Issue
Check the Power Supply
If an adequate power is not being supplied to your Netgear router, then how it will show green color LED instead of orange? So, to see a continuous green LED, make sure to provide a continuous power supply to your Netgear router.
Run an Internet Speed Test
Run a speed test for your internet connection. Chances are your internet is not working fine and this might be a reason behind Netgear router orange light issue. So, make sure that your router is connected to a correct and working WiFi network. To verify your internet speed, access routerlogin web address and see if it works for you.
Check the Cable Connections
If you are using a faulty Ethernet cable, then also it can result in Netgear router orange light issue. To fix it, make sure to establish a finger-tight and precise Ethernet connection between your Netgear router or modem.
Power Cycle your Netgear Router
Power cycling the Netgear router can also help you fix orange power LED issue. In order to power cycle the device without any hassle, follow the steps given below:
- Turn off your Netgear router by unplugging it from its respective power outlet.
- Disconnect all your WiFi devices that are connected with the router using a wired connection or wirelessly.
- Wait for some time.
- After that, plug your Netgear router back into the power outlet.
- Now, connect all your devices to the router and access the Netgear login page to customize its settings accordingly.
Update the Router Firmware
If none of the aforementioned troubleshooting tips solves the orange color LED issue for you, then chances are the firmware on your Netgear router is outdated. So, what you have to do is to log in to your router via 192.168.1.1 or www.routerlogin.net, get into the router login page, search for the available updates for your device, and hit the Update button in case you see the new firmware version.
Reset Your Netgear Router
Still struggling with Netgear router orange LED issue? If yes, consider the reset process as the last resort. To reset your Netgear router to the factory default settings, follow the steps given below:
- Power on your Netgear router.
- Disconnect all the connected devices from your Netgear router.
- Locate the router’s reset hole.
- Once found, press and hold it with the help of a pin or paper clip.
- Release it and wait for your Netgear router to reboot.
Congrats! Your Netgear router resets successfully. Configure it again using the default settings and Netgear router login admin password.
In a Nutshell
So, these were some quick fixes through which you can get rid of the Netgear router orange light issue. On the off chance if you are still struggling with the same issue, contact our experts now via comments for immediate and effective solutions.
Wishing you a trouble-free Netgear Router experience!
