HVAC contractors

If the ductwork is damaged, the effectiveness of a heating and cooling system is greatly reduced. In an ideal condition, conditioned air flow freely from the HVAC system into the home. In the worst-case scenario, the cost of replacing ripped or damaged ducts by hiring HVAC contractors in Athens, GA, is outweighed by wasted energy.

Ducting damage can be caused by a variety of factors, including holes. Ducting holes can be caused by various factors, including poor duct connection sealing, disconnected ducts, and insect infestation. Your home’s HVAC system will have to work harder to compensate for air leaks in the ductwork, which could lead to premature failure. Other issues that may arise as a result of holes in the exterior or interior of your home include increased monthly energy costs and the accumulation of dust and debris.

When holes allow pollutants such as dust, mold spores, insulation fibers, and chemical odors to enter your home, indoor air quality suffers. Duct repair is a low-cost, high-reward job for the health of your home and family. Let’s find out how to fill these roles.

How Do HVAC contractors in Athens, GA, repair holes in the ductwork?

Finding The Hole

The first step is to identify the flaws in the ventilation system. You should start by inspecting any exposed ducts. You may need to go up under the house or remove the moveable ceiling tiles to inspect the ductwork in your home. You should inspect the ductwork for any signs of damage or leaks.

It’s possible that the holes are so small that you can’t see them at all. As a result, a smoke test is required. An HVAC repair company in Athens, GA, advises you to Light a candle and turn your fan to its highest setting. Smoke the ducts that are exposed. Begin at the point where your ducts intersect. When smoke is blown out or sucked into the system, holes in the ductwork may be visible.

Repairing Your Ductwork

  • Finding the damaged sections of your ductwork is the first step in repairing any leaks.
  • You must patch any leaks in your ducts with duct mastic sealing or metal duct tape. You won’t have to repeat or reapply them, but they will aid in permanently eliminating leaks. If the hole is large, consider having that section of ducting rebuilt. A significant amount of air leaking out can cause havoc on your heating, ventilation, and air conditioning system and raise energy costs.
  • Examine the registers and vents. After repairing the ductwork’s holes, double-check the registers and vents to ensure they are properly connected. Over time, these connections may become slack, resulting in air loss. Check that they are securely fastened so that air can circulate freely.
  • The ducts should be insulated. To reduce the risk of bugs chewing holes in your ductwork, insulate it. You can prevent air leaks by insulating your ducts. Less money spent on repairs and maintenance means less money spent on your system.

Filling smaller holes with tape.

Cleaning your ductwork begins with thoroughly rinsing and drying, followed by a good soapy water wash. After patching the duct hole, use UL 181 foil-backed tape to ensure no air or moisture escapes. If you need to use tape in extreme temperatures, this one is safe to use. Using any tape other than ducting tape increases the risk of smoke and fire. Remove a 6-inch length of tape and wrap it around the duct, beginning with the edge slightly above the hole. When you get back to where you started, slightly overlap the tape and go around the duct again. Continue doing so until the entire hole is filled.

Filling the Larger Holes

After cleaning out the duct, Athens ga HVAC companies advise measuring the hole’s height and breadth and adding one inch to each. Trace these dimensions onto 26-gauge sheet metal and cut it out with metal cutters. The metal sheet hole should be repaired. While repairing a sheet metal duct, insert a #10 self-tapping sheet metal screw into each patch corner with a power screwdriver. Wrapping the patch on both sides with foil tape will keep it in place on a fiberboard duct. Finally, silicone caulk should be used to seal any gaps around the repair.

Follow all of the measures above and still have problems with your HVAC system not being efficient. You should have a professional HVAC contractor in Athens, GA, like Superior Air Management Contractors, evaluates your system. There might be holes in the ducting that you overlooked, or the holes could be in an area of the ductwork that is not visible. A skilled technician will have all of the equipment necessary to determine where you are losing air and will be able to repair it instantly. If you have a serious problem, they may suggest that you have your ducting updated, which they may accomplish for you.

Consult the FAQ(Frequently Asked Questions) section for more information.

Is it worthwhile to replace the ductwork?

 It should be replaced if your ducting is more than 15 years old.

Is new ductwork costly?

The average cost of ductwork installation is between $459 and $6,000.

When should you clean your ductwork?

About every three to five years

Also know about sflix