Uncategorized

Reasons Why You Can’t Update Firmware of Netgear EX6100

Did you try to perform a firmware update on your Netgear EX6100 extender? But, what happened? Did you fail to execute the firmware update process? If you’ve answered all these questions is yes, then we can understand your pain. But before you start pulling your hair, give it a read to this article. Perhaps, you might be able to update the firmware of your Netgear EX6100 after you finish reading this post. So, let’s get started.

Why Can’t You Update Firmware of EX6100?

  • Your Extender is Placed Incorrectly

The first and foremost reason why you are unable to update the firmware on your Netgear EX6100 extender is its incorrect placement. Perhaps, its WiFi signals are getting interrupted. So, make sure that your Netgear EX6100 range extender is not placed in an area filled with WiFi interference.

While relocating your extender, make sure not to place the extender in corners or near thick concrete walls. Also, keep the extender away from devices emitting radio waves. After relocating the extender, check if you get success with the firmware update process.

  • Poor Connection Between EX6100 and Router

If the connection between your Netgear EX6100 and the host router is unstable, it can also prove to be a hurdle in executing the firmware update process. To get the problem resolved, consider strengthening the connection between your wireless devices. For this, bring them close to each other.

Another thing you can do to stabilize the connection between your Netgear EX6100 and router is to use an Ethernet cable. But, make sure not to use a damaged one.

  • Use of Incorrect Web Address

Are you sure you’re using the correct web address to reach the Netgear EX6100 login page? Probably not. Ensure that you are typing mywifiext.net correctly in the address bar of the web browser. In addition, do not use the search bar of the web browser.

Just in case you are using an iOS device to update the Netgear EX6100 firmware, use mywifiext.local to access the extender login page.

  • An Outdated Web Browser

You can also fail to update the firmware of your Netgear EX6100 extender if the web browser you are using is running on its outdated version. So, before you proceed to update the extender’s firmware, update the web browser by navigating to its section.

In addition, make sure that the web browser you are using is not accumulated with unnecessary files. Therefore, consider clearing them as soon as possible.

  • You’re Using Wrong Login Credentials

It is a well-known fact that the Netgear EX6100 extender’s default login credentials act as a key to unlock its web-based setup page. And, you can’t update the firmware without reaching there. So, ensure that you’re typing the correct default username and password to log in to your Netgear range extender. Avoid typos as much as possible.

Also, if you’ve ever changed the login credentials of your Netgear EX6100 extender, use them to reach the web-based management page.

  • Excess Security

The device you’re using to update the firmware of your Netgear EX6100 extender should not be packed with excess security. It means you have to temporarily disable antivirus software and firewall on your PC before updating the firmware. Besides, ensure that the PC is connected to the extender’s Netgear_ext for the successful firmware upgrade.

  • Your Extender is Struggling with Bugs

Minor bugs are another reason that won’t let you update the firmware of your Netgear EX6100 extender. These are generally known as technical glitches. Thanks to rebooting; a universal hack to get rid of technical glitches. So, don’t wait to reboot your Netgear EX6100 wireless extender.

To reboot your Netgear EX6100, switch it off, wait for some time, and turn it on back. Try to update the firmware of your Netgear extender again and see if this time you’ve got lucky.

  • You’ve Downloaded the Wrong Firmware File

It might not have come to your mind in the first place but, is the most crucial element of the Netgear EX6100 extender firmware update process. So, cross-check whether you’ve downloaded the corrected firmware file for your range extender or not.

Just in case you’ve downloaded the incorrect firmware file, you have to restore your WiFi device to the factory default settings and perform the Netgear EX6100 setup from scratch.

Wrapping Up

So, these were the reasons that were preventing you from updating the firmware of your Netgear EX6100. Signing off with the hope that you’ll be able to address the issue with the help of the tips mentioned in this article and update your extender successfully.

Related Articles

Back to top button