Netgear Nighthawk router helps in eliminating blind spots with an ultimate wireless coverage. This smart WiFi device replicates the existing WiFi signals coming out from your modem or access point and provides the uninterrupted internet range all over the house.
No doubt that Netgear Nighthawk router has earned massive user base and the whole credit goes to its flawless features. But sometimes, nearly 80 percent of users face common issues during Netgear WiFi router setup Such issues can be really annoying and very tricky to solve.
Are you also sailing on the same boat? If yes, then you have arrived at the right post. In this write-up, you will surely going to learn some of the best tips to fix the issue. Let’s get started!
Unable to Connect to Netgear Nighthawk Router
Improper or wrong placement of your Netgear Nighthawk router might be the root cause of the issue. Not only this but also the placement of your existing modem or access point that you use for the Netgear WiFi router setup process may results in the same issue.
The only way to fix the issue is to place your Netgear Nighthawk router and your modem or access point in the same room. Also, it is suggested – avoid placing your Netgear Nighthawk router near to thick walls, doors, inside a cabinet, under a table or corners.
Thus, by doing this, you can solve the issue easily.
Can’t log In to Netgear Nighthawk Router
For the configuration of your device, you need to access the Nighthawk router login using its default IP. The Nighthawk router login page allows you to configure your device with ease. Sometime, when a user tries to access the login page they usually get stuck with an error message of popup. It happens usually when there is no active connection between your Netgear Nighthawk router and your client devices.
To fix the issue, make sure of the following points:
First things first, make sure that you have entered the correct Netgear router IP address.
Ensure that the power and client link LED on your Netgear Nighthawk router is stable.
Make sure that you are using an up-to-date internet browser for accessing the Nighthawk router login page.
Use the latest firmware version on your Netgear Nighthawk router.
Power cycle your Netgear Nighthawk router, including PC, laptop, smartphone, modem or access point.
Connect your Netgear Nighthawk router to your modem or access point.
Intermittent WiFi Connection
Another common yet major issue while setting up your Netgear Nighthawk router is discontinuous or intermittent WiFi connection issue. There could be a number of reasons behind this issue:
Outdated firmware version on your Netgear Nighthawk router.
Distance between your Netgear Nighthawk router and your client devices.
Placement of your Netgear Nighthawk router.
Expired internet plan.
Epitome of Convenience – Opt for Netgear Nighthawk extender. Contact us for Netgear Nighthawk extender setup process.
If you are still facing issues with your Netgear Nighthawk router, consider resetting it back to default factory settings.
To reset your Netgear Nighthawk router, follow the steps listed below:
Right off the bat, ensure that your Netgear Nighthawk router is powered on.
Disconnect your Netgear Nighthawk router from your client devices.
Now, using a pin or a paper clip, push the Netgear router’s reset hole.
Hold the reset hole for a few seconds and release it.
That’s it! Your Netgear Nighthawk router has been reset successfully. Now, you can configure the device again using the default Netgear Nighthawk router login details.
We hope that the troubleshooting steps given in this post have helped you out to fix major issues with Netgear Nighthawk router. If you still can’t make the most out of your Netgear Nighthawk router, contact our expert technicians now.